AX3700 [ 6 DUTY / 1 STANDBY AUTO AMPLIFIER CHANGEOVER PANEL ]

________________________________________________________________________________________

INTRODUCTION

Amperes AX3700 offers a great flexibility and simplicity in cabling for auto amplifier fault changeover system with its combination of amplifier fault sensor modules and changeover panel in a box. The iternally generated Pilot Tone and sensory circuit shall detect any faulty duty amplifier and would initiate a changeover process.

AX3700 has been optimised for faster fault detection and changeover as compared with AS4000 modules. Pilot tones are generated at intervals to avoid constant loading of power amplifiers.

Changeover are performed at both input and output sections, making it suitable for application in a matrix system. At any one time, only a failed duty unit shall be replaced by a standby amp, to avoid overloading.

FEATURES

	Cater for 6 duty and 1 standby
	Expandable for 1 standby to cater for more than 6 duty amps.
	Built in Pilot Tone generator, transmit at intervals and senses at sequence to protect amplifiers
	Overloading protection by allowing only a single take over
	Prioritised changeover which higher numbered amplifier shall be preferred for take over if more than two units are down
	Shorter fault detection time from 10 to 25 seconds
	Changeover at input and output section simultaneously ; suitable for matrix system installations
	Input link switch ; making connection of sources easier
	Channel isolation switch for unused or un-monitored channel
	Individual channel status indicators ; normal, fault and changeover

TECHNICAL SPECIFICATIONS

Front View Of AX3700 Rear View Of AX3700