Fire Alarm Interface
Upon activation of a distress situation, there is a need to address them properly, either it is a false alarm or otherwise. FI6000 is an interface to Fire Alarm Control Panel, which is programmed to perform a sequence of activities upon receiving contact signal from the former.
FI6000 can be integrated with various Amperes equipment such as zone decoder, zone selector, siren unit, EVAC voice message player, etc. The most critical application is to perform phased evacuation / broadcast in accordance to the requirement of EN54.
Each controller has 24 contacts, which normally denotes zone number and can be cascaded as required. The unit is easily programmed via the configuration software.
32 bits ARM processor for fast processing
Integration with Amperes products via RS485 and dry contacts
Able to trigger other devices via contacts
24 dry contact and expandable
Programming via Configuration software
Bi-colour LED for fast identifications
Configurator Software Main Page
Power requirement :
32 bit ARM processor
Mini USB jack
FI6000 Config software
RS485 19.2 kbps
24 dry contacts
4 relay 3A rating
LED, bi colour
482 X 44 X 180 mm
Firmware / Software
Version : 1.15