Paging Relay Module
Output Side View
Remote Paging Override Module
PR7400 is a new addition to VC / VP category, which is a module for providing a relay contact whenever a paging is in progress, as well as converting the 100V line paging audio to line level, all in a box.
The available functions of the unit shall be :
NO and NC relay of 1A contact allows local BGM source overriding, bypass local volume controller to allow central paging to pass through. This is useful during essential paging and whenever 24V DC overriding signal is not available in the cabling works.
100V - Line audio converter
When it is required that the central paging to be broadcasted to local speakers utilising the local amplifier / system, it provides an audio conversion with balanced line audio.
DPDT with NC and NO relay for different output configurations
100V to Line audio conversion
Adjustable detection sensitivity, relay trigger duration
Adjustable line output volume
Suitable for remote overriding for installations without 24V DC VC overriding cable
Modular for flexible placement of unit such as in cabinets, risers, etc
Suggested Installations :
- Boutiques / restaurants
- Function rooms
- Remote buildings linked with 100V without
24V DC overriding signal
- Classrooms etc with volume controllers
Certain zones, such as retail units, restaurants, theaters are normally free from normal paging of central system, and they would have own localized BGM or simple PA.
Only essential paging would pass through the localized speakers. As such, PR7400 would be employed to provide overriding of local volume controller ( if available ) and inserting line audio to the mixer.
In this example, audio to the speakers is powered from local amplifier.
In this setup, central paging shall power the local speakers, regardless whether the local amplifier is turned on or off. This shall be a preferred setup and useful for emergency paging.
It is important to consider the load of local speakers and provide adequate power rating of amplifiers at central rack.
Power requirement :
Paging load / rating
Isolation to 100V
24 DC via local adapter
2.1W ( standby )
2.5W ( operating )
50 / 70 / 100V line
5 - 80V rms
80 - 5 KHz
NC and NO ( DPDT )
1A @ 24V DC
100mW @ 100V
5 - 18 seconds
Mute - 0 dB
20-20 KHz +/- 3dB
Power, Relay trigger, Audio
50 X 147 X 40 WH
200g ( est )