DA2208
Audio Distribution Amplifier

DA2208 is used when a single signal is to be distributed to a substantial quantity of amplifiers, to avoid original signal distortions due to impedance drops. In rule of thumb, 6 to 8 links shall be the maximum quantity.
It has individual channel bass, treble and volume controls, making it easy to control specific amplifier output for designated zone. In normal mode, it is a dual 1 input to 4 outputs but can be linked to serve 1 in 8 outputs.
Highlights
High efficiency and better frequency response with Class D amplifier
Auto Fault Sensor ( AFS ) with dry contact for changeover
RS485 output for remote monitoring
Features
-
As dual 1 input 4 output or
-
Single 1 input 8 outputs
-
Individual bass, treble and vol controls
-
Fail safe direct out on DC failure
Technical Specifications
Power requirement :
Voltage
Consumption
Configuration
Inputs
Outputs
Gain
Controls
Freq response
Dimensions :
Weight :
24V DC
2.4W
Dual 1 in 4 out or
Single 1 in 8 out
1or 2 XLR line balanced
4 or 8 XLR line balanced
+ 4 dBU
Bass, Treble, Volume
150 - 19 KHz
482 X 44 X 180 mm
1.56 kg
Documents
Catalogue
Instruction Manual
ACAD Image