iPX5151 ETHERNET PAGING CLIENT

Introduction

iPX5151 is the paging client which converts analogue paging audio into LAN. It is suitable for PD Series desktop consoles which accepts RS485 and line audio inputs for IP conversion.

Audio quality is centered around human voice and thus applies mostly for non music streaming.

It can be used both as audio insert and extract. A dry contact is available for general use, which would trigger upon paging activation ( emergency )

As generally required, emergency paging via EP1200 shall have higher priority over normal paging, which would mute any incoming or normal paging in progress.

Documents

Catalogue

Instruction Manual

ACAD Image

Firmware / Software

Updated : 17/6/18

Version : 2.06

Catalog

Manual

Drawing

Firmware

Side view of iPX5151

Technical Specifications

Power requirement :    

   Voltage                

   Current          

Connectivity :                 

   LAN Interface      

   Protocols               

   Priority Protocols    

Broadcast mode  

Audio :

   Analogue in / out 

   THD             

   S/N ratio            

   Conversion format  

                                     

User Interface     

                                 

                                 

Dimensions    

Weight             

12 - 24V DC 

< 100 mA

          

RJ45 ; 10/100T Base

TCP/IP, UDP, IGMP, HTTP

UDMP, ADP

Unicast / Multicast

1.25 V ( line )

0.1 %

83 dB

MP3 ( analogue to IP ) 

IMA ADPCM / MP3 / WAV

IE Ver 8 and above, Firefox

Google Chrome ( preferred )

RS485 

100 x 147 xx 40 mm

300 gms

  • Simple setup procedures

  • Selectable stream bandwidth

  • Continuous peer to peer streaming

  • Allows Multicast and Unicast mode

  • Multipurpose dry contact available

 

iPX5155 EHTERNET PAGING / BGM CLIENT

Introduction

iPX5155, similar to iPX5151, accepts audio and RS485 data and converts to TCP/IP and vice versa.

The difference is it would normally receive BGM and whenever a paging is destined for the client, it shall mute the BGM. The music would resume once the paging is deactivated. However, any emergency paging shall have highest priority over BGM and normal paging.

It has better audio quality streaming, suitable for high fidelity audio, capable of streaming of up to 320 kbps MP3 file. User shall have choice in selecting the streaming bit rate and has 5 band equalizer.

Apart from paging setup, it can be used as peer to peer audio streaming in a network.

Documents

Catalogue

Instr. Manual

ACAD Image

Firmware 

Updated : 17/6/18

Version : V2.06

Catalog

Manual

Drawing

Side view of iPX5155

Technical Specifications

Power requirement :    

   Voltage              

   Current              

Connectivity :                 

   LAN Interface           

   Protocols                   

   Priority Protocols     

Broadcast mode      

Priority                       

Audio :

   Analogue in / out     

   THD                           

   S/N ratio                    

   Conversion format  

                                       

User Interface        

                                 

                              

Dimensions         

Weight                  

12 - 24V DC 

< 100 mA

        

RJ45 ; 10/100T Base

TCP/IP, UDP, IGMP, HTTP

UDMP, ADP

Unicast / Multicast

Emergency - Paging - BGM

1.25 V ( line )

0.1 %

83 dB

MP3 ( analogue to IP ) 

IMA ADPCM / MP3 / WAV

IE Ver 8 and above, Firefox

Google Chrome ( preferred )

RS485 

100 x 147 xx 40 mm

300 gms

  • BGM and Paging streaming

  • BGM muting feature in paging mode

  • High defination up to 320 kbps

  • Selectable stream bandwidth

  • Continuous peer to peer streaming

  • Allows Multicast and Unicast mode

  • Multipurpose dry contact available

Back To Top

 

iPX5300 ETHERNET MUSIC CLIENT

Introduction

iPX5300 is used for extracting audio transmitted from iPX5200 or from PMX LAN software, generally for music streaming.

It accepts various audio formats, best with MP3 of up to 320 kbps. The audio output is line balance, which can be fed directly to remote mixer, active speaker, etc.

Documents

Catalogue

Instruction Manual

ACAD Image

Firmware / Software

Last updated : 31 Jul 18

Version : 2.09

Catalog

Manual

Drawing

Side view of iPX5155

Technical Specifications

Power requirement :    

   Voltage                       

   Current               

Connectivity :                 

   LAN Interface          

   Protocols                 

   Priority Protocols    

Broadcast mode      

Audio :

   Analogue in / out      

   THD                             

   S/N ratio                     

   Conversion format   

                                       

User Interface             

                                       

Dimensions                 

Weight                          

12 - 24V DC 

< 100 mA

      

RJ45 ; 10/100T Base

TCP/IP, UDP, IGMP, HTTP

UDMP, ADP

Multicast

1.25 V ( line )

0.1 %

83 dB

MP3 ( analogue to IP ) 

IMA ADPCM / MP3 / WAV

IE Ver 8 and above, Firefox

Google Chrome ( preferred )

100 x 147 xx 40 mm

320 gms

  • High defination up to 320 kbps

  • Allows Multicast mode

  • Balanced line output

Back To Top

 

iPX5500 ETHERNET COMMUNICATION BOX

Introduction

iPX5500 is data interface, allowing two way communication from Amperes PMX LAN software and remote equipment with RS485 data port.

Among application is QP Series power amplifiers, which has RS485 data port that can be controlled with PC through LAN, allowing the user to control volume and monitoring of the equipment.

Usage of iPX5500 is not limited to Amperes range of products but any other devices with RS485 com port that need to be monitored via network

Technical Specifications

Power requirement :    

   Voltage     

   Current         

Connectivity :                 

   LAN Interface      

   Protocols                

   Priority Protocols     

Broadcast mode       

User Interface           

                                    

Dimensions                

Weight                      

12 - 24V DC 

< 100 mA

 

RJ45 ; 10/100T Base

TCP/IP, UDP, IGMP, HTTP

UDMP, ADP

 

Multicast

IE Ver 8 and above, Firefox

Google Chrome ( preferred )

100 x 147 xx 40 mm

320 gms

Documents

Catalogue

Instr Manual

ACAD Image

Firmware / Software

Last updated : 

Version :

Catalog

Manual

Drawing

Side view of iPX5500

  • Universal communication interface for RS485 data via IP

  • Two way communications

  • Compatible for all Amperes products 

Back To Top

 

iPX5400 : ETHERNET DATA & AUDIO TRANSCEIVER

Technical Specifications

Introduction

iPX5400 works in pair, transmitting audio and data in duplex in LAN, direct network connection or using fiber cable through Fiber to LAN converter.

Why it is required ?....

In the event that a paging point or audio source is required to be transmitted to other location / main rack, and when new cabling is not possible, iPX5400 can be used to run in the existing LAN.

Another application for long distance connectivity, say Guard House to Main Building, with fiber laid to avoid surge and audio loss to the copper cable, iPX5400 is a right tool to transmit the audio and data, coupled with fiber - LAN converter.

iPX5400 can work independently without the need of iPX5101 Network controller, thus providing a great solution to a simple problem of connectivity.

Documents

Instr Manual
Catalogue

Firmware / Software

Version : 1.06 Aug 19

Bug fixes to streaming

Catalog

Manual

Firmware

Side view of iPX5400

Power requirement :    

   Voltage     

   Current      

Connectivity :                 

   LAN Interface           

   Protocols                  

   Priority Protocols     

Broadcast mode       
Setup                       

Audio :

   Analogue in / out      

   THD                            

   S/N ratio                 

   Conversion format   

   

                                   

Data                               
                                       

User Interface             

                                       

Dimensions                  

Weight                          

  

12 - 24V DC 

< 100 mA

            

RJ45 ; 10/100T Base

TCP/IP, UDP, IGMP, HTTP

UDMP, ADP

Unicast 
Plug and Play

1.25 V ( line )

0.1 %

83 dB

WAV PCM 48KHz 16 Bit

(Bidirectional& Half Duplex)

UART RS485
(Bidirectional & Full Duplex)

IE Ver 9 and above, Firefox

Google Chrome ( preferred )

100 x 147 xx 40 mm

320 gms

  • Low latency at 20 ms

  • Duplex RS485 data and voice packets

  • Half duplex for music streaming

  • General purpose relay contact available

  • 3 modes of streaming

  • Direct connections without network switch with auto crossover

Back To Top

© 2017 by amperes electronics 

  • Facebook - Black Circle
Last updated on  4 Nov 2019
amperes electronics sdn bhd
Co Reg : 509025 X
70 Jalan Industri PBP 3
Taman Perindustrian Pusat Bandar Puchong
47100 Puchong, Selangor
Malaysia
+603-58827757 / 7758
PayPal payment -
Applicable for outside Malaysia payment only