SPEAKER ZONE DECODERS / SELECTORS

Note : Renovations is being carried out at this page. 

Introduction 

Included in this section are paging mic zone decoders, several versions of zone selectors including uninterrupted paging zone decoders, integrated zone decoder / selectors and source selector. They are used to decode data from paging mic and activate the selected zone for paging broadcast.

SPEAKER ZONE SELECTORS

6 Ch Speaker Zone Selector

12 Ch Speaker Zone Selector

6 Ch Uninterrupted Paging Zone Selector

6 Ch Speaker Zone Selector W Fail Safe

12 Ch Speaker Zone Selector W Fail Safe

ZONE DECODER / SELECTOR 

24 Ch Mic Zone Decoder

8 Ch Zone Decoder / Selector

2 x 4 Ch Zone Decoder / Selector / Matrix Extender

INPUT SOURCE SELECTOR

12 Ch Speaker Zone Selector W Fail Safe

 

Amperes ZS5062 / 5122  :  6 / 12 Ch Speaker Zone Selector ( With Fail Safe )

Speaker Zone Selector

Introduction :

ZS5062 and 5122 looks like any ordinary zone selectors but with one distinct feature is the fail safe operation. Should the power to the unit is interrupted or the unit itself fails, all zones shall be activated, to ensure that any emergency broadcast shall not be interrupted. Apart from this, all other features available in other zone selectors remained.

RS485 communication port is available for remote triggering or monitoring via PMX software.

Technical Specifications

Power requirement :    

   Voltage                   

   Consumption (idle) 

   Consumption ( AC ) 

Load / ch              

Output Zone       

Amp inputs           

Selection                  

                                 

Switching mode   

Indicators              

Dry contact        

Dimensions (mm)            

Weight                         

24V DC ; 0.5A

3.3 / 6.3 W 

0.7 / 0.9 W

500W 100V

6 / 12

6 / 12

Front switch / rear analog

RS485

Normal, paging bypass, AC

Individual zone, bypass

3A

482 X 44 X 180                           

1.85 / 2 kg

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

Speaker Zone Selector

ZS5062 - 6 Ch Speaker Zone Selector

ZS5062 - Rear View

  • 6 and 12 Expandable to 16 cascades

  • Fail safe feature

  • RS485 data port for monitor / trigger

  • Local paging override

  • Flexible amp - zone configuration

Back To Top

 

ZS5601 / 5121  :  6 / 12 Ch Speaker Zone Selector

Speaker Zone Selector

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

Introduction :

These classic speaker zone selectors, available in 6 and 12 channels are used to switch BGM or Paging audio to selected zones. They can be cascaded to form larger setup.

Triggering a zone via paging mic shall bypass the front selected zone ( BGM ) and is indicated by a bypass LED. They are suitable for PM series of paging microphones for direct switching or installed with TD6240 zone decoders in case of larger installations using PD series of paging consoles.

ZS5121 12 Ch Speaker Zone Selector

Technical Specifications

Power requirement :    

   Voltage                  

   Consumption
 

Load / ch     

Output Zone   

Amp inputs    

Selection        

Switching mode 

Indicators            

Dry contact            

Dimensions (mm)          Weight        

24V DC ; 0.5A

3.5 W  /  6.8 W

500W 100V

6 / 12

6 / 12

Front switch / rear analogue

Normal, paging bypass, AC

Individual, bypass (priority)

3A

482 X 44 X 180                           

1.7 / 2.1 kg

ZS5121 Rear View

  • 6 and 12 zone versions

  • Cascade to more zones

  • Remote trigger via ext paging mic

  • Paging override of BGM

  • Dry contact for EM mic

  • Flexible amp to zone configurations

Back To Top

 

ZS5602  :  6 Ch Uninterrupted Paging Zone Selector

ZS5602 Front LR.png

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

Introduction :

Uninterrupted paging is used whenever it is required that paging to a zone shall not interrupt other zones on BGM. It is more costly to setup as 2 sets of amplifiers shall be required ; one for BGM and the other for Paging.

ZS5602 is designed for the purpose, which has 2 sets of amplifier inputs, and zone selection is available for paging and BGM. Other features as per normal zone selector remains. Should more zones are required, they can be cascaded as many as wanted.

Technical Specifications

Power requirement :    

   Voltage   

   Consumption 

Load / ch      

Output Zone

Amp inputs

Selection   

Switching mode

Indicators     

Dry contact  

Dimensions (mm)

Weight              

24V DC ; 0.5A

10W W

500W 100V

6 BGM / 6 Paging

Front switch / rear analogue

Normal, paging bypass, AC

Individual, bypass (priority)

3A

482 X 44 X 180                           

2.2 kg

ZS5602 Rear View

  • 6 zone and expandable for more zones

  • BGM and Paging amplifier inputs

  • Remote zone trigger

  • Emergency mic trigger with dry contact

  • Suitable for 3 or 4 wire system

Back To Top

 

TD6240  :  Speaker Zone Decoder

TD6240 Front LR.png

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

Introduction :

Amperes TD6240 is 24 channel zone decoder meant for Amperes PD series of paging microphones, decoding the data for switching of zone selectors. They can be stacked for larger setup of up to 192 zones.

Zone triggering with ZS zone selectors are through Cat 5e cables provided.  Each TD6240 has 3 circuits for PD connections, and with each circuit, multiple paging console can be looped, enable multi point paging system.

Technical Specifications

Power requirement :    

   Voltage   

   Consumption

Switching channel

Input circuit  

Switching connection 

Audio :

Input impedance  

Output impedance

Freq response

Audio input  

Audio output

Data      

Dimensions (mm) 

Weight    

24V DC ; 0.5A

2.4 W

24

3​

RJ45 with Cat5e

Line 10 K Ohm

600 Ohm

70 - 15 KHz

Line ( 1.2V )

Mic / Line

RS485 19.2 kbos

482 X 44 X 180

2.5 kg

TD6240 Rear View

  • 24 ch decoding and expandable

  • Priority setting for multi point setup

  • Selectable output level : Mic / Line

  • Compatible with most zone selectors with negative triggering mode

  • Connects directly to ZS remote trigger ports

Back To Top

TD6400 : 2 x 4 Ch Zone Decoder / Matrix Expander

 
TD6080 Front LR.png

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

Introduction :

TD6400 works similarly with TD6080, as zone decoder for PD Series of microphones with front manual zone selector. However some improvements are added to make this unit more flexible ie, it is divided into 2 groups of 4 zones each. This is useful in zone grouping setup when used with Matrix controller for zone expansion. It shall reduced the number of unused zones within the group.

ie. if an output 1 from Matrix is to serve 3 zones ( zone 1 to 3 ) and output 2 with 4 zones ( Zone 4 to 7 ), only 1 zone shall be unused, as compared to using TD6080 which would have total 9 unused zones by using 2 nos of the unit.

Starting zone address is now flexible and not tied up to the unit's starting address. Each group would have arbitrary starting address, such as group 1 with starting address of 9.

TD6400 would be a perfect component to be used with Matrix controller for Zone Expansion, as illustrated in the diagram below.

  • Integrated zone decoder & selector

  • 2 x 4 output configuration

  • Flexible starting address

  • Expandable to total 248 zones

  • Multi point paging inputs

  • Individual amp - zone connections

  • Configurable as group BGM/Paging for matrix setup

Technical Specifications

Power requirement :    

   Voltage  

   Consumption 

Switching channels 

Cascade    

Amplifier channels

Mic Input circuit

Switching connection  

   

Audio :

Input impedance 

Output impedance 

Freq response 

Audio input   

Audio output 

Data    

Dimensions (mm)

Weight    

24V DC ; 0.5A

6 W

2 x 4 

31 ( 248 zones )

8

Front Switch

RS485 from PD Mic

Line 10 K Ohm

600 Ohm

70 - 15 KHz

Line ( 1.2V )

Line

RS485 19.2 kbos

482 X 44 X 180 

2 kg

PA diagram
 

TD6080  :  8 Channel Zone Decoder / Selector

TD6080 Front LR.png

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

Introduction :

TD6080 is a combination of Zone Decoder and Selector in a unit, featuring 8 ch zone selection, engineered for convenience in installation works and reduction of equipment count in the rack.

They can be stacked up to form up to 128 zones with two circuits for paging microphone connections. Also configurable as group BGM / Paging for matrix setup.

Technical Specifications

Power requirement :    

   Voltage  

   Consumption 

Switching channels 

Cascade    

Amplifier channels

Mic Input circuit

Switching connection  

   

Audio :

Input impedance 

Output impedance 

Freq response 

Audio input   

Audio output 

Data    

Dimensions (mm)

Weight    

24V DC ; 0.5A

6 W

8

16 ( 128 zones )

8

2

Front Switch

RS485 from PD Mic

Line 10 K Ohm

600 Ohm

70 - 15 KHz

Line ( 1.2V )

Line

RS485 19.2 kbos

482 X 44 X 180 

2 kg

TD6080 Rear View

  • Integrated zone decoder & selector

  • 8 ch and expandable to 128 zones

  • Multi point paging inputs

  • 8 in / out amp - speaker configurations

  • Configurable as group BGM/Paging for matrix setup

Back To Top

 

SS6401  :  Source Selector

SS6401 Front LR.png

Introduction :

SS6401 is a simple 4 input source selector with RCA jacks.  It is suitable for music selection before input to mixer.

Technical Specifications

Power requirement :    

   Voltage  

   Consumption

                                     

Input / impedance

          

       

   

Input connections  

Output impedance

Gain (max)  

                      

Selection  

Dimensions

Weight

24V DC 

 0.15A

                                     

CD : 2V / 47K Ohm

Tuner : 600mV / 10K Ohm

Cass : 500mV / 10 K Ohm

Aux : 1.25V / 20 K Ohm

RCA

1V, 600 Ohm RCA

CD : -6 dB, Tuner : 4 dB

Cass : 6 dB / Aux : -2 dB

Daisy chain

482 X 44 X 180 mm

1.8 kg

Documents

Catalogue

Instruction Manual

ACAD Image 

Catalog

Manual

Drawing

SS6401 Rear View

  • 4 input sources

  • Input level balancing circuit for constant output

Back To Top

© 2017 by amperes electronics 

  • Facebook - Black Circle
Last updated on  4 Nov 2019
amperes electronics sdn bhd
Co Reg : 509025 X
70 Jalan Industri PBP 3
Taman Perindustrian Pusat Bandar Puchong
47100 Puchong, Selangor
Malaysia
+603-58827757 / 7758
PayPal payment -
Applicable for outside Malaysia payment only