amperes electronics
DP2212 / DP2406
Class D Compact Multi Channel Amplifier
DP2000 Series amplifiers—DP2406 (4×60W) and DP2212 (2×120W) - are Class D multi-channel units ideal for matrix setups, offering energy efficiency, rack space savings, and cost-effective installation.
Multi channel Class D power amplifiers with isolation output transformer
Various protection features to ensure long lasting operation
Dual speed fan controls on temp
AC and DC operation
Introduction
DP2000 Series features compact Class D power amplifiers designed for efficient multi-zone installations. DP2406 offers four channels at 60W 100V line each, while DP2212 delivers two channels at 120W 100V line per output. Both models use Class D amplification, providing high power efficiency, low heat dissipation, and a flat frequency response.
Ideal for matrix systems and setups with multiple zones, these amplifiers reduce unit count, save rack space, and lower overall installation costs—making them a smart choice for modern PA systems.
Packing information
Carton size : 550 (L) x 425 (W) x 180 (H) mm
Gross weight : DP2212: 11 kg / DP2406: 14.3 kg
1 unit(s) per carton
Introduction
DP2000 Series features compact Class D power amplifiers designed for efficient multi-zone installations. DP2406 offers four channels at 60W 100V line each, while DP2212 delivers two channels at 120W 100V line per output. Both models use Class D amplification, providing high power efficiency, low heat dissipation, and a flat frequency response.
Ideal for matrix systems and setups with multiple zones, these amplifiers reduce unit count, save rack space, and lower overall installation costs—making them a smart choice for modern PA systems.
Packing information
Carton size : 550 (L) x 425 (W) x 180 (H) mm
Gross weight : DP2212: 11 kg / DP2406: 14.3 kg
1 unit(s) per carton
DP2212 / DP2406
DP2212
DP2406
Power requirements
Power rating (rms)
2 x 120W 100V line
4 x 60W 100V line
Operating voltage
220 - 240V AC or 24V DC
220 - 240V AC or 24V DC
Current consumption
1.4A
1.4A
Standby current
0.7A
0.7A
Input, output & protections
Input
2 x XLR
4 x XLR
Input level (max)
1.25Vrms Balanced
1.25Vrms Balanced
Outputs
100V, 70V, 30V
100V, 70V, 30V
Frequency response
100Hz - 16 kHz @ 1 kHz +/- 3 dB
100Hz - 16 kHz @ 1 kHz +/- 3 dB
Protection
Thermal, short circuit AC & DC fuse
Thermal, short circuit AC & DC fuse
Indicator
Power, audio input level, over temperature, amplifier faulty
Power, audio input level, over temperature, amplifier faulty
Cooling system
Via continuous operating fan
Via continuous operating fan
Case
Dimensions (W x H x D)
482 x 88 x 335 mm
482 x 88 x 335 mm
Weight
9.45 kg
12.85 kg
Note: The specification parameters may be changed, added, or omitted without prior notice.
Class D amplification
Multi channel amplification with isolated output trans.
70, 100V line & 4 Ohm output options
Thermal, short circuit protections
Inrush current limiter
Dual speed fan controls on temp
AC and DC operation
Registered association members of
International recognitions
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
Payment
PayPal payment is only applicable for payment from outside of Malaysia
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094