amperes electronics

MM8804
8 x 4 DSP Matrix Mixer / Controller
MM8804 is ideal for venues like mosques (masjid), churches, clubhouses, and restaurants, allowing flexible audio mixing and distribution to different areas with tailored sound settings.
-
8 In / 4 Out Matrix Controller
-
Built-in Digital Signal Processor (DSP)
-
Individual channel volume, EQ, delay controls
-
Web interface for setup and controls by PC or smartphone
-
WiFi and LAN cable connectivity
-
24V DC back up for uninterrupted service
Introduction
MM8804 is a 4-output matrix mixer/controller designed for flexible audio mixing and routing across multiple zones. Each output comes with its own audio controls ie. DSP. Delay feature is included to provide audio balancing for uneven ceiling height or different position of speaker along horizontal installation. It supports 8 line inputs with a priority override for important messages, making it compatible with the EP1200 Emergency Paging Panel and MR1301 MK II EVAC Message Player.
Control is accessible via the front panel or an internet browser for advanced settings. The RP1106 Remote Control Panel provides easy access to key output settings, offering a simpler alternative to the full control panel, especially for non-technical users. It also offers easy access to key functions with different security levels, making it ideal for residential spaces, places of worship (e.g. Masjid), and partitioned banquet halls.
Packing information
-
Carton size: 555 (L) x 295 (W) x 95 (H) mm
-
Gross weight: 3.0kg
-
1 unit per carton
Introduction
MM8804 is a 4-output matrix mixer/controller designed for flexible audio mixing and routing across multiple zones. Each output comes with its own audio controls ie. DSP. Delay feature is included to provide audio balancing for uneven ceiling height or different position of speaker along horizontal installation. It supports 8 line inputs with a priority override for important messages, making it compatible with the EP1200 Emergency Paging Panel and MR1301 MK II EVAC Message Player.
Control is accessible via the front panel or an internet browser for advanced settings. The RP1106 Remote Control Panel provides easy access to key output settings, offering a simpler alternative to the full control panel, especially for non-technical users. It also offers easy access to key functions with different security levels, making it ideal for residential spaces, places of worship (e.g. Masjid), and partitioned banquet halls.
Packing information
-
Carton size: 555 (L) x 295 (W) x 95 (H) mm
-
Gross weight: 3.0kg
-
1 unit per carton
-
MM8804
Power requirements
Operating voltage
220 - 240V AC, 50 / 60 Hz, 24V DC Back up
Power consumption (240V AC)
4.8W ; 20mA
Current consumption (24V DC)
4.6W ; 190mA
Input, output & controls
Configuration
8 in / 4 outputs
Input channels
8 line balanced with flexible priority selection (Ch 1 to 4)
Input connections
Mini Phoenix jack
Input level / impedance
10k Ohm
Priority
Dry contact
Output channels
4 Outputs: Balanced line 1.25V RMS (+4 dBU)
Output level / impedance
600 Ohm
Controls
Front panel / web interface / RP1106
DSP Control parameters
Tone, volume, delay, 31 band EQ
User interface
Web browser - Google Chrome preferred
Connectivity
LAN Cable, Wi-Fi, RS485 to RP1106
THD + N at rated power
< 1%
S/N Ratio
> 60%
Frequency response
20 - 20 kHz
Operating condition
Operating temperature
-10°C to 60°C
Case
Dimensions (W x H x D)
482 x 44 x 180 mm
Weight
2.5kg
Note: Due to continuous product improvement policy, the specification parameters may be changed, added or omitted without prior notice.
-
8 In / 4 Out Matrix Controller
-
Built-in Digital Signal Processor (DSP) for precise sound adjustments and tuning
-
Individual channel volume, EQ, delay controls
-
Web-based control interface for setup and controls by PC or smartphone
-
Wi-Fi and LAN cable for seamless connectivity
-
24V DC back up for uninterrupted service and reliable operation
-
Cross references
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094