amperes electronics
iHS8020
20W IP PoE Horn Speaker
iHS8020 is a 20W PoE horn speaker with a 2” compression driver, perfect for outdoor use in Amperes IP PA systems, offering easy installation and reduced wiring with PoE and Class D amplification.
Clear sound with 2" compression coil driver
Remote configuration via Amperes PMX Software
Waterproof RJ45 connectors
Energy-efficient Class D amplifier
Introduction
iHS8020 is a 20W IP PoE horn speaker designed for decentralized setups in Amperes IP / Network PA systems. It features a 2” compression coil driver with an ABS flare, powered by PoE and amplified using a Class D amplifier. Suitable for outdoor areas such as car parks, it includes waterproof RJ45 connectors for reliable performance.
About Amperes IP Speakers
Amperes IP Speakers offer a convenient solution for placing speakers wherever background music (BGM) or paging is needed in an IP-based PA system. They eliminate the need for home-run cabling, saving on installation costs—as long as a network port is available nearby.
Available in four models—box, ceiling, pendant, and horn—these speakers are all powered by PoE and built with Class D https://www.ampereselectronics.com/amplifiersamplifiers.These speakers work seamlessly with Amperes iPX systems, receiving audio from PMX software or iPX5200 MK II server, and support paging via iPD/iEP microphones or PMX software.
Packing information
Carton size : 220 (L) x 290 (W) x 290 (H) mm
Gross weight : 1.90 kg
1 unit(s) per carton
Introduction
iHS8020 is a 20W IP PoE horn speaker designed for decentralized setups in Amperes IP / Network PA systems. It features a 2” compression coil driver with an ABS flare, powered by PoE and amplified using a Class D amplifier. Suitable for outdoor areas such as car parks, it includes waterproof RJ45 connectors for reliable performance.
About Amperes IP Speakers
Amperes IP Speakers offer a convenient solution for placing speakers wherever background music (BGM) or paging is needed in an IP-based PA system. They eliminate the need for home-run cabling, saving on installation costs—as long as a network port is available nearby.
Available in four models—box, ceiling, pendant, and horn—these speakers are all powered by PoE and built with Class D https://www.ampereselectronics.com/amplifiersamplifiers.These speakers work seamlessly with Amperes iPX systems, receiving audio from PMX software or iPX5200 MK II server, and support paging via iPD/iEP microphones or PMX software.
Packing information
Carton size : 220 (L) x 290 (W) x 290 (H) mm
Gross weight : 1.90 kg
1 unit(s) per carton
iHS8020
Power requirements
Power rating
20W
Power source
PoE+ (IEEE802.3 af : 48V)
Standby power consumptions
0.5W
Operating power consumptions
15W Max
Sensitivity, interface & control
Amplifier rating
20W 4 Ohm
Speaker type
Compression coil
Speaker drive diameter
2" (50 mm)
Sensitivity @ 1 kHz / w / m
92 dB
Frequency response
200 - 8 kHz (1 kHz +/- 3 dB)
S/N ratio
85 dB
Audio codec
IMA ADPCM / MP3 / WAV
Network & protocols
100 Base-T / TCP / IP, UDP, IGMP, HTTP, ADMP, ADP
User interface
Via web browser ; Google Chrome V90+ preferred
Priority controls
Paging over BGM
Operating condition
Temperature
0°C - 60°C
Humidity
70%
Case
Housing
ABS
Dimensions (W x H x D)
293 x 212 x 290 mm
Weight
1.80 kg
Color
White
Note: The specification parameters may be changed, added, or omitted without prior notice.
2" Compression coil driver speaker for clear and focused sound reproduction
ABS Flare
Easy setup with PoE power
Remote configuration available via Amperes PMX Software
Automatically mutes BGM during paging
Built-in energy-saving Class D amplifier
Includes waterproof RJ45 connectors
Suitable for outdoor areas such as car parks
Registered association members of
International recognitions
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
Payment
PayPal payment is only applicable for payment from outside of Malaysia
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094