amperes electronics
TD6240
24 Ch Mic Zone Decoder
TD6240 is a 24-channel zone decoder that connects PD series paging microphones to ZS series zone selectors, with seamless zone switching via RJ45 connector.
Selectable balanced audio output (Mic or Line)
Expandable up to 248 zones for larger systems
Multi-point paging setups with 3 PD input circuits
Configurable start zone for flexibility in iPX and matrix setups
Introduction
TD6240 is a 24-channel zone decoder that connects Amperes PD Series paging microphones to ZS Series zone selectors, providing seamless zone switching via RJ45 connections. It supports multi-point paging with three PD input circuits, allowing multiple consoles to be looped within each circuit. For larger systems, it can be stacked to extend zone control up to 248 zones. The latest upgrade adds a configurable start zone for greater flexibility, making it ideal for iPX or matrix setups.
Packing information
Carton size : 555 (L) x 295 (W) x 95 (H) mm
Gross weight : 2.50 kg
1 unit(s) per carton
Introduction
TD6240 is a 24-channel zone decoder that connects Amperes PD Series paging microphones to ZS Series zone selectors, providing seamless zone switching via RJ45 connections. It supports multi-point paging with three PD input circuits, allowing multiple consoles to be looped within each circuit. For larger systems, it can be stacked to extend zone control up to 248 zones. The latest upgrade adds a configurable start zone for greater flexibility, making it ideal for iPX or matrix setups.
Packing information
Carton size : 555 (L) x 295 (W) x 95 (H) mm
Gross weight : 2.50 kg
1 unit(s) per carton
TD6240
Power requirements
Operating voltage
24V DC
Power consumption
2.4W (100 mA)
Input, output, & data
Switching channels
24
Cascade / max zones
10 (max 248 zones)
Input circuit
3
Output connection (Triggering)
RJ45 to ZS zone selector
Input impedance (Ohm)
Line : 10k
Output impedance
600 Ohm balanced
Frequency response
70 - 15 kHz
Audio input
Line balanced (+4 dBU)
Max audio output
Line balanced (+4 dBU)
Data protocol
RS485
Baud rate
19.2 kbps
Case
Dimensions (W x H x D)
482 x 44 x 180 mm
Weight
1.90kg
Note: The specification parameters may be changed, added, or omitted without prior notice.
Firmware last updated on Mar 2021. Please contact us on upgrade procedures.
V2.31 - Bug fix to Siren trigger
24-channel zone decoder
Supports multi-point paging priority settings
Selectable balanced audio output (Mic or Line)
Connects PD Series paging microphones to ZS Series zone decoders such as ZS5601, ZS5121, ZS5062, and ZS5122 via RJ45 remote trigger ports
Expandable up to 248 zones
Configurable start zone for flexibility in iPX and matrix setups
Registered association members of
International recognitions
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
Payment
PayPal payment is only applicable for payment from outside of Malaysia
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094