amperes electronics
Professional Public Address (PA) System Manufacturer
ZS5062
6 Ch Speaker Zone Selector with Fail Safe
ZS5062 is a 6-zone high-powered fail-safe selector that keeps zones active during power loss for uninterrupted emergency broadcast.
Supports 1000W per zone on a 100V line
Remote triggering and monitoring via RS485 and PMX software.
Expandable up to 248 zones with up to 16 units per amp-to-zone setup
Local paging overrides BGM for priority announcements
Introduction
ZS5062 and ZS5122 are high-power, fail-safe speaker zone selectors designed to ensure uninterrupted emergency broadcasts by maintaining speaker line connection during power or unit failure. Supporting up to 1000W per zone on a 100V line, they offer flexible amp-to-zone configuration and can be expanded up to 248 zones via cascading.
The unit supports local paging with prority override over BGM, along with remote activation via analog input and RS485. Integrated with Amperes PMX software, it allows real-time monitoring and control, with both front panel and remote paging operation for ease of use.
Packing information
Carton size : 550 (L) x 295 (W) x 95 (H) mm
Gross weight : 2.55 kg
1 unit(s) per carton
Introduction
ZS5062 and ZS5122 are high-power, fail-safe speaker zone selectors designed to ensure uninterrupted emergency broadcasts by maintaining speaker line connection during power or unit failure. Supporting up to 1000W per zone on a 100V line, they offer flexible amp-to-zone configuration and can be expanded up to 248 zones via cascading.
The unit supports local paging with prority override over BGM, along with remote activation via analog input and RS485. Integrated with Amperes PMX software, it allows real-time monitoring and control, with both front panel and remote paging operation for ease of use.
Packing information
Carton size : 550 (L) x 295 (W) x 95 (H) mm
Gross weight : 2.55 kg
1 unit(s) per carton
ZS5062
Power Requirements
Operating voltage
24V DC adaptor via PS9400
Power consumption (idle)
3.29W
Power consumption (All Call)
0.72W
Current consumption (idle)
0.14A
Current consumption (All Call)
0.03A
Connectivity
Max load / channel
1000W 100V Line
Number of zones
6 zones
Amplifier inputs
6 inputs
Zone selection
Front panel switch & remote (zone & all call)
Cascade limitation
16 units
Remote triggering
-ve triggered (common ground)
Indicators
Individual zone switch, all call, and priority
Data communications
RS485 19.2 kbps baud rate
Switching mode
Individual & All Call Local zone bypassed when remote trigger is activated
Operating temperature
-10° - 60°C
Physical Specifications
Dimensions (W x H x D)
482 x 44 x 180 mm
Net weight
1.95 kg
Note: The specification parameters may be changed, added, or omitted without prior notice. Last updated on 15 Apr 2026.
Supports 1000W per zone on a 100V line
Fail-safe operation keeps speaker lines connected during power or unit failure
Local paging overrides BGM for priority announcements
Expandable up to 248 zones with flexible amp-to-zone setup (up to 16 cascaded units)
Remote activation via analog input and RS485, with monitoring through Amperes PMX III software
Front panel and remote paging control for easy operation
Registered association members of
International recognitions
© 1999 - 2026 Amperes Electronics Sdn Bhd. All Rights Reserved.
Payment
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
PayPal payment is only applicable for payment from outside of Malaysia
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong,
47100 Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong
47120 Puchong, Selangor, Malaysia
Export Sales Office (Singapore)
Amperes Asia Pte Ltd
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094
Amperes Electronics Sdn Bhd
SSM Registration No: 200001006420 (509025-X)
Your Trusted PA System Manufacturer since 1999
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Industri Pusat Bandar Puchong
47100 Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Export Sales Office (Singapore)
Amperes Asia Pte Ltd
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094