amperes electronics
FI6000 MK II
Fire Alarm Interface
FI6000 MK II is an upgraded programmable interface that links Fire Alarm Control Panel to PA systems, automating emergency actions like phased evacuation, sirens, and voice alerts.
Easy-to-set action sequences linked to the Fire Alarm Panel
24 dry contact inputs for fire alarm panel and other uses
Two-color LEDs for quick identification of active channels
Fast performance powered by 32-bit ARM processor
Introduction
FI6000 MK II is a enhanced fire alarm interface controller of the previous model FI6000 - designed to integrate with a Fire Alarm Control Panel (FACP) for managing emergency responses through a programmable sequence of actions. Once a contact signal is received, it can trigger alarms, voice messages, or zone-based evacuation procedures—whether it’s a false alarm or a real emergency.
Built to comply with EN54 phased evacuation requirements, FI6000 MK II connects seamlessly with Amperes equipment such as zone decoders, zone selectors, siren units, and EVAC message players. It features 24 input contacts, typically used for zone triggering, and is expandable via cascading. Programming is straightforward using the included configuration software, making it a vital component for structured and automated emergency response systems.
Packing information
Carton size : 555 (L) x 295 (W) x 95 (H) mm
Gross weight : 2.55 kg
1 unit per carton
FI6000 MK II
Power requirements
Input voltage
24V DC ; 1A
Power consumption (all triggered)
21W ; 0.9A
Input, output, & communications
Input channels
24 ports
Trigger method
Dry contact, NO
Output channels (dry contacts)
4
Output contact rating
3A
Output contact models
ON, OFF
Contact connectors
Mini Phoenix
Indicators
Channel bi color LED Dry contact LED
Communications
RS485 ; 19.2 kbpsLAN 10/100 Base T
User interface
Web browser : Google, Firefox
Case
Dimensions (W x H x D)
482 x 44 x 180 mm
Weight
1.90kg
Note: The specification parameters may be changed, added, or omitted without prior notice.
Firmware: V1.15 (Jan 20) - Bug Fixed
Easy-to-set action sequences linked to the fire alarm panel (phase evacuation activities, sirens, and voice alerts)
Fast performance powered by 32-bit ARM processor
Connects to Amperes devices through RS485 and dry contact inputs
Can activate external devices using output contacts
Includes 24 dry contact inputs, expandable if needed
Easy configuration using dedicated user-friendly software
Two-color LEDs for quick identification of active channels
Introduction
FI6000 MK II is a enhanced fire alarm interface controller of the previous model FI6000 - designed to integrate with a Fire Alarm Control Panel (FACP) for managing emergency responses through a programmable sequence of actions. Once a contact signal is received, it can trigger alarms, voice messages, or zone-based evacuation procedures—whether it’s a false alarm or a real emergency.
Built to comply with EN54 phased evacuation requirements, FI6000 MK II connects seamlessly with Amperes equipment such as zone decoders, zone selectors, siren units, and EVAC message players. It features 24 input contacts, typically used for zone triggering, and is expandable via cascading. Programming is straightforward using the included configuration software, making it a vital component for structured and automated emergency response systems.
Packing information
Carton size : 555 (L) x 295 (W) x 95 (H) mm
Gross weight : 2.55 kg
1 unit per carton
Registered association members of
International recognitions
© 1999 - 2025 Amperes Electronics Sdn Bhd. All Rights Reserved.
Payment
© 1999 - 2024 Amperes Electronics Sdn Bhd. All Rights Reserved.
PayPal payment is only applicable for payment from outside of Malaysia
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094
Sales Office (Malaysia)
70, Jalan Industri PBP 3,
Taman Perindustrian Pusat Bandar Puchong 47100, Puchong, Selangor, Malaysia.
Tel: +603-5882 7757 / 7758
Production Factory (Malaysia)
2, Jalan Meranti Puchong D25@Meranti Puchong 47120 Puchong, Selangor, Malaysia
Amperes Asia Pte Ltd
Export Sales Office - Singapore
(Co Reg: 201102253E)
1, North Bridge Road, #13-03, High Street Centre, Singapore 179094