top of page

QP2000 Series Power Amplifiers with
Auto Fault Sensor ( AFS )

QP2125 / 2250 / 2375 / 2500

Amperes Power amplifier with Auto Fault Sensor (AFS) - QP2000 Series: QP2125/ 2250/ 2375/ 2500

QP2000 Series of amplifiers with auto fault sensing and in built fault changeover relay are available in various power ratings of 125W ( QP2125 ), 250W ( QP2250 ), 375W ( QP2375 ) and 500W ( QP2500 ).  They had been running for more than decade, powering many installations dutifully.

​

The distinct features are the auto fault sensor ( AFS ) and standby changeover relay. It self detect its amplifier circuitry and would initiate relay changeover for standby unit to take over its duty. QP2000 also has RS485 port which allows remote monitoring and controls directly from PC ( via UART converter or through iPX5500 network comm box ).

Highlights

Auto Fault Sensor ( AFS ) and built in changeover relay )

UART port for remote controls and monitoring purpose

Tone controls - Bass and treble  

Features

  • Auto fault senser ( AFS )

  • Built in fault changeover relay

  • Digital setting for Vol, Bass, Treble

  • RS485 data for monitoring and control

  • Fan control options

  • Various protections incl inrush current

  • Efficient for power savings

Technical Specifications

( QP2125 / 2250 / 2375 / 2500 )

Ratings  :

                                  

Power requirement

Voltage                    

Current (ac / dc) 

                                  

                                    

                                    

Standby current

    

Input and Output:

Inputs             

Output

Output impedance

​

Freq response       

S/N ratio          

Controls          

Protection           

Communication 

Fault sensing     

​

Dimensions  :  

Weight  (kg)  :    

125 / 250 / 375 / 500W 100V 

  

 

220 - 240 V ac / 24V DC 

QP2125 : 1.1A  /  5.9A

QP2250 : 1.7A / 10.6A

QP2375 : 2.9A / 16.7A

QP2500 : 3.3A / 19.6A

0.35A max (24V DC)

​

​

Line 1V balanced w link out

100V line / 4 Ohm                      80 / 40 / 27 / 20 Ohm

​

70 - 15 KHz

> 70 dB @1KHz, 1V

Volume, Bass, Treble

Fuse, thermal, short

RS485 ; 19.2 kbps

Internal 20kHz pilot tone 

​

482 X 88 X 335 mm

12.3 / 13.5 / 16.5 / 18.8

​

Documents

Catalogue

Instruction Manual

ACAD Image 

Rear View

100V / 70V / 4 Ohm Outputs

Dual Speed Fan

24V Back Up Input / Link

Standby Amp Changeover 

Ground Lift Switch

Amperes QP2000 Series- QP2500 Rear View

Fault Dry Contact

RS485 Data Port

Line Input / Link Out

bottom of page