top of page

iPX Ethernet Paging System

iPX5400
Ethernet Data & Audio Transceiver

Improved with ultra low latency
Amperes Ethernet Data & Sound Transceiver - iPX5400
Amperes Ethernet Data & Sound Transceiver Side view - iPX5400
Highlights

Super fast processing with ultra low latency audio transmission

Simplex and Duplex  audio & data streaming ( in 2 modes ) 

Multipurpose dry contact for event trigger / remote receiver trigger

iPX5400 works in pair, transmitting audio and data in duplex in LAN, direct network connection or using fiber cable through Fiber to LAN converter.

​

Why it is required ?....

In the event that a paging point or audio source is required to be transmitted to other location / main rack, and when new cabling is not possible, iPX5400 can be used to run in the existing LAN.

​

Another application for long distance connectivity, say Guard House to Main Building, with fiber laid to avoid surge and audio loss to the copper cable, iPX5400 is a right tool to transmit the audio and data, coupled with fiber - LAN converter.

​

iPX5400 can work independently without the need of iPX5101 Network controller, thus providing a great solution to a simple problem of connectivity.

Features
  • Low latency at 20 ms

  • Duplex RS485 data and voice packets

  • Half duplex for high definition music streaming

  • General purpose relay contact available

  • 2 modes of streaming ie. with always streaming and streaming on trigger

  • Direct connections without network switch with auto crossover

Technical Specifications
Documents

Power requirement :   

Voltage                           

Current                        

​​

Connectivity :                 

LAN Interface                

Protocols                   

Priority Protocols 

Broadcast Mode 

Setup         

​

Audio inputs :

Analogue In / Out 

THD          

S/N ratio   

Conversion format   

  

Data           

​

​

User Interface :                 

​

Dimensions :

Weight :

 

12-24V DC                             

<100mA

​​

          

RJ45 ; 10/100T Base

TCP/IP, UDP, IGMP,HTTP

UDMP, ADP

Unicast

Plug and Play

        

                 

Line level 1.25 V

0.1%

83 dB

WAV PCM 48KHz 16 Bit

(Bidirectional & Half Duplex)

UART RS485

(Bidirectional & Half Duplex)

           

IE Ver 9 and above, Firefox,Google Chrome (preferred )

​

100 x 147 xx 40 mm 

320 gms

Catalogue

Instruction Manual

ACAD Image 

Note :

Firmware Ver 2.05 ( Dec 21 ) Available 

Download available at download page. 

See note on Version Compatibility 
Please contact us for details

Amperes Version Compatibility

For uninterrupted operation of IP network, we would recommend the following versions to be used in your system.

Do check here as we shall make updates from time to time. 
 

Cross References

iPX Ethernet Paging System 

- Main page of Amperes iP System

Application Schematic
 Amperes Ethernet Data & Sound Transceiver - iPX5400
bottom of page